S@ceesohk.com

Shenzhen yiroka doorbell manufacturer

 
Home > News > Company News >

Esko/Kongsberg Knife blades for the XN and XL Series

来源:未知 |最近更新: 2019-04-16

 Esko/Kongsberg Knife blades for the XN and XL Series

Product name
Stock #
Length /
edge
angle
Application
1 BLD-SF186
Sales code: g42417444
40.0mm
1.587"
21°
Widely used for corrugated samplemaking.
Can be used for qualities up to and including DW
when the guide pin is installed. Also used for FC but
tip is quite brittle and the blade is subject to flexing.
10 BLD-SF110
Sales code: g42436063
39.5mm
1.555”
23°
Good choice for folding carton. More durable than the
ASR and cuts with less plough effect in the cut edges.
Also suitable for varnish blankets in the MicroCut
Tool.
4 BLD-SF177
Sales code: g42429795
36.8mm
1.450"
39.5º
Used by many customers for FC samplemaking.
Produces a nice cut in thin carton. Tip will last long,
due to edge angle. Can also be used for chipboard.
Good choice for cutting varnish blankets.
It can be seated to the bottom of the knife adapter (in
most cases).
5 BLD-SF184
Sales code: g42441840
24,5mm
.965”
32,5º
Good standard blade for folding carton, and other
thin, compact materials such as polycarbonate and
other synthetics. The SF184 is very rigid and will
bend less than most other standard carbon steel
blades. At the same time the grind angle gives nice
cut line quality in folding carton.
Max. cutting thickness: 6mm - ¼”
6 BLD-SF102
Sales code: g42411041
47.5mm
1.870"
23°
Triple wall samplemaking.
A near-equivalent to this blade is the Martor Solingen
#28 blade.
41 BLD-TZ129
Sales code: g42435636
53° Super-trapezoid, deep-edged blade, used with the V
notch knife and the HD-knife tool.
This blade is thicker and stiffer than standard
trapezoid blades and will give a more accurate cut.
Thickness 0.9mm - .035”
42 BLD-TZ192
Sales code: g42424374
53° Super-trapezoid, deep-edged blade, used with the V
notch knife and the HD-knife tool.
This blade is thinner than the TZ129 blade and will
give very good result used in fluted core board.
Thickness 0.6mm - .024”



 

43 BLD-TZ511 (trapeze shaped)
Sales code: g42448589
53° Trapezoid shaped blade for v-notching.
Very good blade for V-notch cutting in though
materials such as Re-board, X-board and triple wall
corrugated. Cuts materials up to about 17mm. Made
from a special Tungsten Carbide alloy, to extend
cutting cycles.
Thickness 0.6mm - .024”
44 BLD-TZ512 (trapeze shaped)
Sales code: g42448597
53° Very good blade for V-notch and straight cutting with
the HD-knife tool in though materials such as Re
board, X-board and triple wall corrugated. Cuts
materials up to about 17mm. Made from a special
Tungsten Carbide alloy, to extend lifetime.
Thickness 0.9mm - .035”
BLD-DF570 (trapeze
shaped)
Sales
code:
g42455
279
45° Specially made blade for the VI45-16 V-notch insert
tool. Works well in materials such as fluted core
boards and triple wall corrugated. Cuts materials up to
about 16mm. Made from a special Tungsten Carbide
alloy, to extend lifetime.
Thickness 0.9mm - .035”